dmesg - gss fsdf dsf
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-26-generic (buildd@lcy01-12) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #28-Ubuntu SMP Tue Aug 11 14:16:32 UTC 2015 (Ubuntu 3.19.0-26.28-generic 3.19.8-ckt4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000392b3fff] usable
BIOS-e820: [mem 0x00000000392b4000-0x0000000039e23fff] reserved
BIOS-e820: [mem 0x0000000039e24000-0x000000003a0e4fff] usable
BIOS-e820: [mem 0x000000003a0e5000-0x000000003ac85fff] ACPI NVS
BIOS-e820: [mem 0x000000003ac86000-0x000000003b619fff] reserved
BIOS-e820: [mem 0x000000003b61a000-0x000000003b61afff] usable
BIOS-e820: [mem 0x000000003b61b000-0x000000003b6a0fff] reserved
BIOS-e820: [mem 0x000000003b6a1000-0x000000003b8b7fff] usable
BIOS-e820: [mem 0x000000003b8b8000-0x000000003bff8fff] reserved
BIOS-e820: [mem 0x000000003bff9000-0x000000003bffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x000000004fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004bfffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: MSI MS-7885/X99S SLI PLUS (MS-7885), BIOS 1.30 09/25/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x4c0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 000040000000 mask 3FFFC0000000 uncachable
2 base 380000000000 mask 3FC000000000 uncachable
3 base 00003F000000 mask 3FFFFF000000 uncachable
4 base 0000F0000000 mask 3FFFF8000000 write-through
5 base 0000F8000000 mask 3FFFFE000000 write-through
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x3c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd920-0x000fd92f] mapped at [ffff8800000fd920]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x4bfe00000-0x4bfffffff]
[mem 0x4bfe00000-0x4bfffffff] page 1G
init_memory_mapping: [mem 0x4a0000000-0x4bfdfffff]
[mem 0x4a0000000-0x4bfdfffff] page 1G
init_memory_mapping: [mem 0x00100000-0x392b3fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x391fffff] page 2M
[mem 0x39200000-0x392b3fff] page 4k
init_memory_mapping: [mem 0x39e24000-0x3a0e4fff]
[mem 0x39e24000-0x3a0e4fff] page 4k
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
init_memory_mapping: [mem 0x3b61a000-0x3b61afff]
[mem 0x3b61a000-0x3b61afff] page 4k
BRK [0x01fea000, 0x01feafff] PGTABLE
init_memory_mapping: [mem 0x3b6a1000-0x3b8b7fff]
[mem 0x3b6a1000-0x3b8b7fff] page 4k
init_memory_mapping: [mem 0x3bff9000-0x3bffffff]
[mem 0x3bff9000-0x3bffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x49fffffff]
[mem 0x100000000-0x49fffffff] page 1G
RAMDISK: [mem 0x35840000-0x36c17fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0540 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003A8F9090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000003A925BA0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000003A8F91D0 02C9CB (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000003AC82F80 000040
ACPI: APIC 0x000000003A925CB0 000170 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000003A925E20 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000003A925E68 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000003A925F08 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 0x000000003A925F48 000042 (v01 00000000 00000000)
ACPI: BDAT 0x000000003A925F90 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x000000003A925FC0 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000003A925FF8 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 0x000000003A926088 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 0x000000003A9260F0 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000003A926120 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000003A926F78 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000003A926FB8 00D647 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: DMAR 0x000000003A934600 0000E4 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 0x000000003A9346E8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x18 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x19 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x4bfffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x3fffffff] + [mem 0x100000000-0x4bfffffff] -> [mem 0x00000000-0x4bfffffff]
NODE_DATA(0) allocated [mem 0x4bfff7000-0x4bfffbfff]
[ffffea0000000000-ffffea0012ffffff] PMD -> [ffff8804af600000-ffff8804bf5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x4bfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x392b3fff]
node 0: [mem 0x39e24000-0x3a0e4fff]
node 0: [mem 0x3b61a000-0x3b61afff]
node 0: [mem 0x3b6a1000-0x3b8b7fff]
node 0: [mem 0x3bff9000-0x3bffffff]
node 0: [mem 0x100000000-0x4bfffffff]
Initmem setup node 0 [mem 0x00001000-0x4bfffffff]
On node 0 totalpages: 4167473
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 3615 pages used for memmap
DMA32 zone: 231316 pages, LIFO batch:31
Normal zone: 61440 pages used for memmap
Normal zone: 3932160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 20 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x392b4000-0x39e23fff]
PM: Registered nosave memory: [mem 0x3a0e5000-0x3ac85fff]
PM: Registered nosave memory: [mem 0x3ac86000-0x3b619fff]
PM: Registered nosave memory: [mem 0x3b61b000-0x3b6a0fff]
PM: Registered nosave memory: [mem 0x3b8b8000-0x3bff8fff]
PM: Registered nosave memory: [mem 0x3c000000-0x3fffffff]
PM: Registered nosave memory: [mem 0x40000000-0x4fffffff]
PM: Registered nosave memory: [mem 0x50000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x50000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:20 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff8804af000000 s87104 r8192 d31680 u262144
pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4102333
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16302228K/16669892K available (8002K kernel code, 1234K rwdata, 3764K rodata, 1408K init, 1300K bss, 367664K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=20.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
NR_IRQS:16640 nr_irqs:992 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-19.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3100.285 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6200.57 BogoMIPS (lpj=12401140)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30114 entries in 118 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffd000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x0000003b491000 end: 0x0000003b4a0fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 1
IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 1
HPET id 0 under DRHD base 0xfbffc000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2687W v3 @ 3.10GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 7363144080 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19
x86: Booted up 1 node, 20 CPUs
smpboot: Total of 20 processors activated (124011.40 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x3a0e5000-0x3ac85fff] (12193792 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:02:48, date: 08/31/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x40000000-0x4fffffff] (base 0x40000000)
PCI: MMCONFIG at [mem 0x40000000-0x4fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:2fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:2fe9] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:2ffa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:2ffb] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:12.4: [8086:2f60] type 00 class 0x088000
pci 0000:ff:12.5: [8086:2f38] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.1: [8086:2f79] type 00 class 0x088000
pci 0000:ff:16.2: [8086:2f6a] type 00 class 0x088000
pci 0000:ff:16.3: [8086:2f6b] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.1: [8086:2fd1] type 00 class 0x088000
pci 0000:ff:17.2: [8086:2fd2] type 00 class 0x088000
pci 0000:ff:17.3: [8086:2fd3] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x50000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb33d000-0xfb33dfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb320000-0xfb32ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb33c000-0xfb33c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb300000-0xfb31ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb339000-0xfb339fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb338000-0xfb3383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb330000-0xfb333fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb337000-0xfb3373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb336000-0xfb3367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb335000-0xfb3350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:1005] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfb200000-0xfb200fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:06:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit]
pci 0000:06:00.0: PME# supported from D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x392b4000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3a0e5000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b61b000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b8b8000-0x3bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0454-0x0457] has been reserved
system 00:00: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0580-0x059f] has been reserved
system 00:02: [io 0x0600-0x061f] has been reserved
system 00:02: [io 0x0880-0x0883] has been reserved
system 00:02: [io 0x0800-0x081f] has been reserved
system 00:02: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:02: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:02: [mem 0xff000000-0xffffffff] has been reserved
system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:02: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:02: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:02: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x50000000-0xfbffbfff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:06: resource 1 [mem 0xfb100000-0xfb1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20320K (ffff880035840000 - ffff880036c18000)
dmar: [Firmware Bug]: RMRR entry for device 05:00.0 is broken - applying workaround
dmar: [Firmware Bug]: RMRR entry for device 06:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x31840000-0x35840000] (64MB) mapped at [ffff880031840000-ffff88003583ffff]
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU12 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU13 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU14 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU15 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU16 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU17 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU18 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU19 sig=0x306f2, pf=0x1, revision=0x25
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1441036968.656:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
mtrr: type mismatch for f9000000,200000 old: write-through new: write-combining
mtrr: type mismatch for f9000000,100000 old: write-through new: write-combining
mtrr: type mismatch for f9000000,80000 old: write-through new: write-combining
mtrr: type mismatch for f9000000,40000 old: write-through new: write-combining
mtrr: type mismatch for f9000000,20000 old: write-through new: write-combining
mtrr: type mismatch for f9000000,10000 old: write-through new: write-combining
mtrr: type mismatch for f9000000,8000 old: write-through new: write-combining
mtrr: type mismatch for f9000000,4000 old: write-through new: write-combining
mtrr: type mismatch for f9000000,2000 old: write-through new: write-combining
mtrr: type mismatch for f9000000,1000 old: write-through new: write-combining
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011c80000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-26-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-26-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-26-generic xhci-hcd
usb usb3: SerialNumber: 0000:05:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-26-generic xhci-hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.19.0-26-generic xhci-hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.19.0-26-generic xhci-hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb338000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.19.0-26-generic ehci_hcd
usb usb7: SerialNumber: 0000:00:1a.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb337000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 3.19.0-26-generic ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: e2bfa75c655707fd5a4bc3a9a6cb49e01a16e1f5'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 11:2:36
bdi 7:1: hash matches
misc loop-control: hash matches
memory memory72: hash matches
rtc_cmos 00:01: setting system clock to 2015-08-31 16:02:49 UTC (1441036969)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000)
Freeing unused kernel memory: 332K (ffff880001bad000 - ffff880001c00000)
random: systemd-udevd urandom read with 1 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x10 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfb336000 port 0xfb336300 irq 42
ata6: DUMMY
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-10: new full-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:8a:5b:d7:87:e9
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 2-2: New USB device found, idVendor=05dc, idProduct=a838
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: USB Flash Drive
usb 2-2: Manufacturer: Lexar
usb 2-2: SerialNumber: AARAPJGOCMLZOIA2
usb-storage 2-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 7-1: new high-speed USB device number 2 using ehci-pci
usb 8-1: new high-speed USB device number 2 using ehci-pci
usb 5-2: new low-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=2109, idProduct=3431
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-9: INTEL SSDSCKGW080A4, DC01, max UDMA/133
ata5.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA INTEL SSDSCKGW08 DC01 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 4:0:0:0: [sda] Attached SCSI disk
usb 7-1: New USB device found, idVendor=8087, idProduct=800a
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 6 ports detected
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 8-1: New USB device found, idVendor=8087, idProduct=8002
usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 8 ports detected
usb 5-2: New USB device found, idVendor=04f2, idProduct=0833
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: USB Keyboard
usb 5-2: Manufacturer: CHICONY
usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Nameserver information manager.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778)
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
usb 3-1.1: New USB device found, idVendor=148f, idProduct=5372
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1: Product: 802.11 n WLAN
usb 3-1.1: Manufacturer: Ralink
[PCSPP,TRISTATE,EPP]
parport0: irq 0 detected
lp0: using parport0 (polling).
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
[drm] Initialized drm 1.1.0 20060810
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
MXM: GUID detected in BIOS
checking generic (f9000000 130000) vs hw (f0000000 8000000)
checking generic (f9000000 130000) vs hw (f8000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0f0050a1
nouveau [ DEVICE][0000:03:00.0] Chipset: GK110 (NVF0)
nouveau [ DEVICE][0000:03:00.0] Family : NVE0
hidraw: raw HID events driver (C) Jiri Kosina
sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb5/5-2/5-2:1.0/0003:04F2:0833.0001/input/input12
Adding 16667644k swap on /dev/sda5. Priority:-1 extents:1 across:16667644k SSFS
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:06:00.0-2/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb5/5-2/5-2:1.1/0003:04F2:0833.0002/input/input13
nouveau [ VBIOS][0000:03:00.0] using image from PROM
nouveau [ VBIOS][0000:03:00.0] BIT signature found
nouveau [ VBIOS][0000:03:00.0] version 80.10.2c.00.02
nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
nouveau [ PFB][0000:03:00.0] RAM type: GDDR5
nouveau [ PFB][0000:03:00.0] RAM size: 6144 MiB
nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:03:00.0] GPU voltage: 862500uv
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:06:00.0-2/input1
nouveau [ PTHERM][0000:03:00.0] FAN control: PWM
nouveau [ PTHERM][0000:03:00.0] fan management: automatic
nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
nouveau [ CLK][0000:03:00.0] 07: core 324 MHz memory 648 MHz
nouveau [ CLK][0000:03:00.0] 0a: core 536-692 MHz memory 1620 MHz
nouveau [ CLK][0000:03:00.0] 0d: core 536-1202 MHz memory 6008 MHz
nouveau [ CLK][0000:03:00.0] 0f: core 536-1202 MHz memory 6008 MHz
nouveau [ CLK][0000:03:00.0] --: core 324 MHz memory 648 MHz
[TTM] Zone kernel: Available graphics memory: 8162248 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 6144 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000f02 00020030
nouveau [ DRM] DCB outp 01: 02000f00 00000000
nouveau [ DRM] DCB outp 02: 08011f82 00020030
nouveau [ DRM] DCB outp 04: 02022f62 00020010
nouveau [ DRM] DCB outp 05: 04833fb6 0f420010
nouveau [ DRM] DCB outp 06: 04033f72 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00020131
nouveau [ DRM] DCB conn 02: 00002261
nouveau [ DRM] DCB conn 03: 00010346
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input17
nouveau [ DRM] allocated 1920x1080 fb: 0x60000, bo ffff8804a7856000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:03:00.0: registered panic notifier
[drm] Initialized nouveau 1.2.1 20120801 for 0000:03:00.0 on minor 0
scsi 6:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 31285248 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 6:0:0:0: [sdb] Attached SCSI removable disk
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
usb 3-1.1: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804a7184a48
xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804a7184a00
xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804a7184a90
xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804a7184ad8
xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804a7184b20
xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804a7184b68
xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804a7184bb0
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
usb 1-10: New USB device found, idVendor=1532, idProduct=0012
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10: Product: Razer Salmosa
usb 1-10: Manufacturer: Razer
input: Razer Razer Salmosa as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:1532:0012.0003/input/input18
hid-generic 0003:1532:0012.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Salmosa] on usb-0000:00:14.0-10/input0
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[394]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1441036975.300:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=697 comm="apparmor_parser"
audit: type=1400 audit(1441036975.300:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=697 comm="apparmor_parser"
audit: type=1400 audit(1441036975.304:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=697 comm="apparmor_parser"
audit: type=1400 audit(1441036975.304:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=697 comm="apparmor_parser"
audit: type=1400 audit(1441036975.304:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=697 comm="apparmor_parser"
audit: type=1400 audit(1441036975.304:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=697 comm="apparmor_parser"
audit: type=1400 audit(1441036975.312:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=697 comm="apparmor_parser"
audit: type=1400 audit(1441036975.312:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=697 comm="apparmor_parser"
audit: type=1400 audit(1441036975.312:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=697 comm="apparmor_parser"
audit: type=1400 audit(1441036975.312:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=697 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
random: nonblocking pool is initialized
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=13)
wlan0: associated
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
do_general_protection: 36 callbacks suppressed
traps: php5[16607] general protection ip:6de31b sp:7fffd9479910 error:0 in php5[400000+844000]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=13)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=13)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=13)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: associate with 60:a4:4c:69:bf:d0 (try 2/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=13)
wlan0: associated